Acrylic Sealant - Waterproofing Africa, We Reign When It Pours

Search
Go to content

Main menu:

Acrylic Sealant

PRODUCTS > WATERPROOFING
 

Supertight acrylic waterproofing compound is a highly flexible liquid applied emulsion, that when reinforced with stitch bonded polyester, forms a homogeneous seamless waterproofing system.

Supertight
in conjunction with stitch bonded polyester is suitable for; flashings, parapet walls, properly graded roof decks, lap joints, roofing screws and many other waterproofing details. Supertight is not suitable for areas of long term ponding or under tiles.

PRODUCT STATISTICS

Colour

  • Red, Grey, Charcoal, Black, Brown, Terracotta, White and Green.

Application

  • Brush, roller or spray.

Coverage

  • 2.2L/m2 – 2.5L/m2 (depending on surface porosity)

Total Solids

  • Total Solids: +/- 55%

Specific Gravity

  • +/- 1.2

Viscosity

  • 110 Krebs Units at 25ºC

Drying Time

  • (Between Coats) Minimum 30 minutes at 25ºC at 65% R.H.

  • (Last Coat) 2-3 hours before resistant to rain.

  • Full cure 12-20 hours at 25ºC at 65% R.H.

Cleaning

  • Water when wet. Ethyl acetate when dry.

Flammability

  • Non Flammable

Surface
Preparation

  • All forms of surface contamination must be removed to ensure a smoothCleaning:  surface, free of moisture and any loose material, or any other barrier to adhesion. Steel and galvanized steel surfaces must be free of loose paint, grease, grime, oil and rust.

Priming  

  • All non metal surface – use a 50% BONDCRYL and clean water mix to prime the entire surface, allow a 30 minute drying time.

On metal surfaces

  • Prime

(011) 614 6380 / 0860 ALL DRY  (255 379)

Opportunities | References | Building Tips | Service Plans | Vermiculite
© 2015 WATERPROOFING AFRICA | Registered Professional Damp Proofing & Waterproofing Commercial  Contractors
We "Reign" When It "Pours"

 
 
Back to content | Back to main menu