WATERPROOFING AFRICA, We Reign When It Pours

Main menu:

BONDCRYL ACRYLIC WATERPROOFING COMPOUND

PRODUCTS

BONDCRYL acrylic waterproofing compound is a highly flexible liquid applied emulsion, that when reinforced with stitch bonded polyester, forms a homogeneous seamless waterproofing system.
BONDCRYL in conjunction with stitch bonded polyester is suitable for; flashings, parapet walls, properly graded roof decks, lap joints, roofing screws and many other waterproofing details.
BONDCRYL is not suitable for areas of long term ponding or under tiles.


PRODUCT STATISTICS
Colour:	Red, Grey, Charcoal, Black, Brown, Terracotta, White and Green.
Application:	Brush, roller or spray.
Coverage:	2.2L/m2 – 2.5L/m2 (depending on surface porosity)
Total Solids:	+/- 55%
Specific Gravity:	+/- 1.2
Viscosity:	110 Krebs Units at 25ºC
Drying Time:	(Between Coats) Minimum 30 minutes at 25ºC at 65% R.H. (Last Coat) 2-3 hours before resistant to rain. Full cure 12-20 hours at 25ºC at 65% R.H.
Cleaning:	Water when wet. Ethyl acetate when dry.
Flammability:	Non Flammable
Surface Preparation	All forms of surface contamination must be removed to ensure a smooth surface, free of moisture and any loose material, or any other barrier to adhesion. Steel and galvanized steel surfaces must be free of loose paint, grease, grime, oil and rust. Technical assistance and applicator training are freely available to all approved users.
Application	PRIMING: All non metal surface – use a 50% BONDCRYL and clean water mix to prime the entire surface, allow a 30 minute drying time. On metal surfaces – Prime with Darachem DC4 and allow 4 hour drying time.